Canopy Round LED Quick Ship

The CPR-QS features a heavy die-cast aluminum alloy housing with an anti-corrosion, rust-proof construction and a white powder coat finish. A prismatic polycarbonate lens encloses Lumileds LEDs. The fixture measures 11.42 inches across and 4.49 inches tall. Three-quarter-inch threaded conduit entries are provided on the top and side of the housing, supporting ceiling mounting with a junction box, ceiling mounting with side wiring, or pendant mounting with conduit entry (pendant hardware by others). The operating temperature range is -20°C to 45°C (-4°F to 113°F).

The CPR-QS operates on a universal voltage driver rated 120–277V with a power factor of 0.9. Wattage is field selectable at 30W, 40W, or 60W, drawing 0.25, 0.33, or 0.5 amps at 120V and 0.1, 0.14, or 0.21 amps at 277V, respectively. Delivered output is 4,200 lumens at 30W, 5,600 lumens at 40W, and 8,400 lumens at 60W, for a consistent efficacy of 140 lm/W across all three settings. Color temperature is 5000K with a CRI of 72+ and a 150-degree beam angle. An optional motion sensor is available, and an 18W emergency battery can be ordered separately as an accessory.

Part of Candela Quick Ship: The CPR-QS is part of the Candela Lighting Quick Ship program from SAGE Brands, which is built around USA-stocked products. It pairs with the CP-QS Canopy LED for projects that call for both round and standard canopy profiles, and its stocked availability suits garage retrofits and tight schedules where made-to-order lead times are not an option.

Replacing metal halide and high pressure sodium: The CPR-QS is designed to replace 60–200W metal halide and high pressure sodium canopy fixtures. Because wattage is field selectable, installers can match the output to the original layout and mounting height at the time of installation, rather than committing to a wattage at the time of order.

Mounting options: The CPR-QS supports three installation methods from the same fixture body: surface mounting with a junction box, ceiling mounting with side wiring, and pendant mounting through the three-quarter-inch conduit entry. Pendant hardware is supplied by others, so confirm the stem or hanger components with your contractor early in the project.

Motion sensor settings: The optional motion sensor is configured by DIP switch, allowing the fixture to be tuned to each space. Detection area can be reduced to fit the application, hold time sets how long the lamp stays at full output after motion stops, and stand-by period and stand-by dimming level control how long and how brightly the fixture holds a low light level before switching off. A daylight sensor setting limits operation to darker conditions, or can be disabled so the lamp responds to motion regardless of ambient light. This makes the CPR-QS a practical fit for stairwell-adjacent drive aisles and intermittently occupied garage levels.

Emergency backup: For egress lighting, the EM18 is an 18W exterior junction box emergency battery with a Li-Ion battery, a 90-minute minimum discharge time, and 100–347V, 50/60Hz input. It is ordered separately from the fixture and includes an integral junction box with half-inch NPT conduit entries. Confirm illumination duration and placement requirements with your electrical contractor or the authority having jurisdiction.

Ordering logic: Use the format CPR-QS-[Output]-[Options]. The output code FS specifies field-selectable wattage, and the optional MS suffix adds the motion sensor. For example, CPR-QS-FS specifies the standard fixture with field-selectable wattage. The EM18 emergency battery is ordered separately as an accessory.

Specifications subject to change — contact SAGE Brands or visit sage.lighting for the most current details.